AquaFibre Innovation

Our achievements

A company with the wind in its sails

AQUAFIBRE INNOVATION

get a quote

Pool

Contemporary collection

Pool

Freeform collection

Frequently asked questions

If your electronics pack stops working completely, it is essential to have the 3 fuses checked/tested. If the problem persists, please contact us. If the circuit breaker closes automatically, please call an electrician to disconnect the heater from the electronics pack.

If your pump is not completely filled with water, you first need to test all the rings (lid ring, center ring of your pump, ring at the outlet of your pump (black and white). In addition, your transparent cover may not be properly positioned. You can refer to the owner's guide (p.11), to make sure you're following the correct instructions for positioning the rubber seal.

If your hull is turning a rusty color, your PH may be too high. To restore your hull's PH, follow these steps: Stop the water pump Add 3kg of -PH for 24 hours Switch on the water pump Wash the hull with Stain Erase Voilà! Your pool will be as good as new.

If your water heater doesn't keep its heat, check that your cover is properly positioned. Then go directly to your Gecko pack to find the link that will explain your problem in more detail.

Although electricity costs vary from place to place, you can count on an average increase of 110$ per month for your heat pump.

An Aqua Fibre Innovation in-ground spa costs around 1100 $ per year, depending on the model you choose.